AC-1 charging pillar
A low-cost solution for the electric car charging. Built-in advanced protection. The station allows to configure the charging current limitation for each of the channels (in accordance with the capabilities provided by the vehicle communication protocol J1772 and IEC 61851-1 standards).
specifications
AC supply
| Voltage | 220 V |
| Frequency | 50 Hz |
| Maximum charging current | 32 A |
| Power consumption | <5 W |
| Required cross-section of the supply cable | Cu 6 mm2 /Al 10 mm2 |
Car interfaces
| Cable connector J1772 | 1 |
Communications
| Ethernet | |
| Operation mode indication | |
| Accounting for the energy consumption | |
| Smart-card reader | |
| OCPP 1.6 protocol support |
Security
| Leakage and short circuit protection | |
| Overvoltage protection | |
| Degree of protection | IP65 |
| Automatic shutdown when charging is done or cable/connection issues found |
Operating conditions
| Ambient temperature | −40…+65 °C |
| Relative humidity at 25 °C | 80% |
| Atmosphere pressure | 630–800 mm Hg |
Dimensions
| Size (Length / Width / Height) | 450х290х1600 mm |
